Setup

Installation

Installation of the ArrowPoint-CAN Bus tools can be achieved simply by running the ArrowPointDiagnosticTool.exe in the following directory:

\ArrowWareDiagnosticTool\bin\Debug

or

\ArrowWareDiagnosticTool\bin\Run directories

Usage

The tool is relatively simple to use. Log in and connect to the CAN Bus network, typically the default settings will work fine.

CAN Bus Settings

You can then access a range of tools on the menu for logging / recording or replaying CAN Bus traffic as well as sending and simulating data in the system.

CAN Bus Tools